Facom SLS.G – Heat Shrink Sheath with metal “D” ring SLS.G19

• Shrink tubing fitted with a strap and a metal “D” ring – SLS. This solution allows you to add an attachment point to all types of products and make them compatible with lanyards and carabiners from the facom sls range. Examples: special tools, pens, sprays etc.
• Shrink tubing fitted with a strap and a metal “D” ring – SLS. This solution allows you to add an attachment point to all types of products and make them compatible with lanyards and carabiners from the facom sls range. Examples: special tools, pens, sprays etc.
• The strap surrounds the shrink tubing for strength and maximum security for all.
• Fabric resistant to common solvents.
• Sheath equipped with an adhesive which becomes liquid with the heat during the retraction of the sheath. optimum temperature of withdrawal: between 150 and 300 ° depending on the thickness and diameter of the sheath.
• Excellent adhesion on most substrates: crude steel, chrome or phosphate, aluminum, wood, plastic, …Precautions: – Clean and degrease the product that will receive the shrink tubing. – Select the correct diameter of shrink-hose according to the allocation table. – Identify a location where the sheath will not harm ergonomics. If possible, choose a location where the sheath can not escape once retracted.- Respect the maximum weight recommended. – Heat the sheath about 3cm away with a standard heat gun Facom E.2015. Be careful not to burn the strap.- Allow to cool for 5 minutes to obtain optimum adhesion of the glue. – Check the bond. – Check the equipment periodically.