AiM PDM32 With 6″ Road Icons Display GPS Data Logging Kit

AiM PDM32 With 6″ Road Icons Display GPS Data Logging Kit
The AiM PDM32 is a 32 channel advanced power distribution module designed to power a multitude of vehicle circuits, removing the need for traditional fuse boxes and relays. The 6″ TFT display with road icons features a fully configurable display with a range of layouts to choose from and a GPS Module providing easy lap timing and lap position for track mapping.

Key Features :

• 32 RGB LEDs    
• Eight analogue digital inputs
• GPS lap timing     
• Four digital inputs
• Data logging facility    
• Two-speed inputs
• 28 High side outputs    
• 4 Half-bridge outputs

Power Distribution Module 
The AiM PDM32 is a 32 channel advanced power distribution module designed to power a multitude of vehicle circuits, removing the need for traditional fuse boxes and relays. It allows for a simplified wiring harness with increased reliability and control functions.

The PDM32 can receive data from the vehicle ECU and even includes a data logger and GPS Module for lap timing and track mapping. The GPS Module is available with cables from 50cm up to 4m. There is also a GPS roof version available in 2m or 4m.

PDM32 Power Outputs
The PDM32 features 28 high sided outputs and four half-bridge outputs: 4 x rated up to 20A (high power), 12 x rated up to 15A (mid-power), 12 x rated up to 10A (low power), 4 x rated up to 35A (half-bridge). Total continuous max current 120A.

Each output provides feedback to the data logger to provide vital information such as open circuits, short circuits, high/low voltage, the number of fault retires, and the time between the reties is user-definable.

All outputs can be configured as PWM’s for a soft start/stop. All of the PDM circuits can be set up and monitored via the Race Studio 3 software.

PDM32 Inputs
The PDM32 features 8 x analogue/digital inputs, 4 x digital-only inputs and 2 x speed inputs.

PDM32 Data Management
The PDM32 can receive and record data from the following sources, ECU – Over 1000 protocols available. Digital/analogue inputs. Internal nine-axis EMU. GPS – Lap time and position.

Expansion modules. Push buttons – From RIO02 (Remote Input Output module) or any commercial CAN keypad. PDM outputs – Currents and status of each channel individually. Other user-defined math channels.

Dash Display 6″ Road Icons

Key Features :

• 6″ TFT display    
• Road Icons
• Five – Status LEDs    
• Ten – Shift light LEDs
• Configurable display    
• Range of layouts